Xbox Rrod Fix

Solving the Xbox 360 No Video Problem

by Lee on September 24, 2011

Article by Jack Bush

As the old joke goes, “What is a TV without video? A radio.” One could ask the same question about an Xbox 360. “What is an Xbox 360 without video? A paperweight.” Having no video from Xbox 360 is a nightmare for avid gamers. Your first reaction is understandable panic. It’s not that big a problem, however. If it’s happened to you, it was probably temporary. It would be nice to know what causes it, and how to prevent or repair the Xbox no video problem in the future.

As you already know, the Xbox 360 is a piece of advance electronic equipment with a lot of electronics in a very small space. One very important component, actually all of the components are very important, is the graphics processor unit (GPU) which is soldered to the motherboard. When this GPU is not working or has for some reason become detached electrically from the mother board, a video display is not longer possible. Overheating of the Xbox 360 can become so intense that the GPU solder connection actually melts, and the GPU can vibrate out of the socket enough to break the electrical connection to the motherboard. When this happens, you have no video. The solution to the problem of no video from Xbox 360s would appear to be ensuring that the GPU never becomes electrically disconnected from the motherboard.

There are ways to fix the Xbox 360 no video problem yourself. All you need is a good repair guide to lead you through the process, and there are plenty of these guides available online. One caution, however. There is a bogus solution to the no video problem that is circulating the gaming community. It involves wrapping your Xbox 360 console in a large towel. Don’t do it. It will simply insulate your unit making it more likely to overheat to a critical degree.

A good repair guide will have clearly written step-by-step instructions to walk you through the entire Xbox 360 no video repair process. Really good ones will have online video tutorials that will explain how your Xbox works and why the recommended fixes work. Don’t grab onto the first guide that you run across. Many are good helpful guides, but some are so much junk. Check with your friends to see what they might have used in the past. Check some of the Xbox blogs to see what other gamers have done.

Most guides focus upon fixing problems like the Red Ring of Death. Make sure that the guide you select is not so limited, you need a guide that attends to all Xbox error problems. Once you have the proper guide, the necessary tools, and a little free time, you can fix your Xbox and be up and running with full video. Of course, the downside is, once the word gets out that you know how to solve the Xbox 360 no video problem, all of your gamer friends will be coming to your for help with their no video problems.

If you don’t want to give 0 to Microsoft support center or wait for 2 months to fix it up. Here is your step by step professional Xbox 360 3 Red Lights Fix Guide. Read the James Dean’s Xbox 360 3 Red Light Fix Review for more…










There are a million videos on how to repair the 360 out there on YT and the net and here is one more to add to the pile. In this video the biggest emphasis on how to repair what the title says basically comes down to the TIGHTNESS OF THE SCREWS, many people don’t realize that due to improper tighness on the gpu and cpu heatsink screws can lead to all of the stated above problems. Recommended that you go down to your local hardware store and find some 5×10 fine thread philips screws and some small washers that will fit over the screws, go to your local pc store and pick up some thermal compound and give this a shot. Total cost shouldn’t run you anymore than . Once you get everything put back together, listen for the fan speed. If it sounds like it’s racing than you’ve probably got the screws too tight or not tight enough. If you get 2, 3, or 4 rings, once again, re check the tightness of the screws and try again. Finally, if you still don’t have video or the video is good and then goes bad again…..Check The Tighness Of The Screws :D Hope this helps a little bit.
Video Rating: 4 / 5



You may also be interested in:

Previous post:

Next post: